F-Series Service Tool

9927-1874_D.exe

The F-Series Service Tool is used to configure, adjust, monitor and troubleshoot an F-Series Control. The service tool runs on a personal computer and communicates with the F-Series Control through a serial connection. It requires the use of a RS232 to TTL converter. This service tool requires Woodward ToolKit v5.0 or newer.

Version 5.04 supports the following Control firmware part numbers:

5418-2724 (FSTP) Rev B, C, E
5418-2725 (ModAct) Rev B, C, E
5418-3834 (FSTP) Rev NEW
5418-3055 (FSTP) Rev NEW, A
5418-3056 (ModAct) Rev NEW, A
5418-7289 (FSTP) Rev  NEW.

System Requirements:

• Microsoft Windows® 8.1, 7, Vista SP1 or later. For Windows XP 9927-1874 rev. C should be installed.
• Microsoft .NET Framework version 4.5.1.
• 1GHz or faster x86 or x64 processor
• 512 MB of RAM
• Minimum 800 by 600 pixel screen with 256 colors
• Recommended screen resolution 1024 x 768 or higher
• 9 pin-D Serial Port (RS232)
• 9 pin-D straight through Serial Cable (not a null modem cable)

Installation Instructions:

1. The first step in installing this software is to download the file from this page. This file is an installation program that will step you through the installation process.
2. After downloading this file, run it and follow the instructions on the setup dialogs.