MicroNet™ Control Service Packs
This Service Pack (9927-2741) is for the MicroNet CPU P1020 VxWorks control. The Service Pack will upgrade any MP1020 CPU Footprint to 5418-7799 Revision A.
This release was done to force the CPU affinity of ipssh_server tasks to core 0 to prevent them from interfering with real-time RG tasks. The openSSL library was also updated to version 1.0.2 to lessen the occurrence of mempartfree errors.
COMPATIBILITY: You will need MicroNet 1.02-0 Coder or later to use this Footprint.
COMPATIBILITY: You will need AppManager 3.14 or higher to install this Service Pack.
- GAP 4.02 or higher
- AppManager 3.14 or higher
- Control Assistant 4.1 or later
- Pentium® PC
- 32 MB of RAM
- Windows® 2000, XP, Vista, 7 or greater
After downloading this file, you will install this Service Pack using AppManager from your desktop or laptop computer. For instructions on installing the Service Pack, refer to the AppManager help. AppManager Help is started under the Help menu.
Running the Service Pack: The Service Pack installs the new firmware on the CPU. This takes approximately 9 minutes. DO NOT REBOOT OR POWER DOWN THE CPU DURING THIS PROCESS! AppManager will prompt to reboot the CPU. Once the CPU is rebooted, the CPU will begin to install the new files. The Status LED will flash green and yellow during this process. The CPU will reboot on its own after this process has completed and the CPU will be visible with AppManager. The entire process takes approximately 15 minutes.